Blog


 

 

Recent News

2017 MD&M West

February 2017: Join Q-PLUS Labs at the 2017 MD&M West show at the Anaheim Convention Center in Anaheim, CA - February 7-9. Our booth has moved! Find us upstairs in the Precision Tec area. We will be unveiling a never before seen, cutting-edge, mystery measuring machine! We will also have the industry's leading measurement manufacturers featuring state of the art systems, software, and live demonstrations.

Q-PLUS Labs’ Nano Measurement Arsenal Expands with New Laser Confocal System

January 2017: Q-PLUS Labs expands its extensive nano measurement capabilities with the introduction of a new laser confocal microscope for non-contact measurement. Using supremely high accuracy laser scanning, this system is extremely versatile and able to perform color profilometry as well as precise measurements down to .5 nanometers (500 picometers)!

Happy Holidays from everyone here at Q-PLUS Labs!

December 2016: Wishing you health and happiness this Holiday Season and prosperity in the New Year. Click here to view our holiday greeting from the dedicated staff at Q-PLUS Labs!

Q-PLUS Labs approved for DPD by GKN

November 2016: GKN issues Q-PLUS Labs approval for Quality Assurance Standard for Digital Product Definition (DPD) at BOEING Suppliers which outlines uniform specifications for supplier control of digital product definition data and software.

Join Q-PLUS Labs at the 2016 Design-2-Part Show!

October 2016: You're invited to Design-2-Part, the largest Design & Contract Manufacturing show in Southern California! The show features more than 300 manufacturing and service categories for the metals, plastics, rubber, and electronics industries.

Q-PLUS Labs' Case Study: California State University, Fullerton's Formula SAE Team's Race Car Engine 3D Scanning

September 2016: CSUF's Formula SAE Chapter enters their 3rd year in the challenging Formula SAE competition and seeks the competitive edge with their new race car redesign.

Q-PLUS Labs' Case Study: Extreme Components, LP's Surface Finish Analysis

August 2016: Extreme Components, LP uses Q-PLUS Labs' nano measurement expertise for providing rapid and accurate surface finish analysis results in comparing how their revolutionary product design for the Injection Mold Industry holds up to traditional standards

Q-PLUS Labs Introduces Newest Addition to Inspection Arsenal with Huge High-End Non-Contact Inspection System

July 2016: Q-PLUS Labs expands its dimensional inspection capabilities once again with the addition of a very large multi-sensor coordinate measuring system, allowing for true 3D non-contact measurement, inspection, and scanning with extreme accuracy.

Q-PLUS Labs Expands Inspection Capabilities with Addition of Large DCC-CMM

June 2016: Q-PLUS Labs unveils the newest addition to its expansive measurement capabilities with the introduction of a 15-30-10 DCC-CMM for the accurate inspection of large and heavy parts. Not only is it one of our largest measurement envelopes, but, at 2.5 microns (intrinsic accuracy), it is also a highly accurate machine.

Join Q-PLUS Labs at Space Tech Expo 2016

May 2016: Join Q-PLUS Labs as we exhibit at Booth #1028 at Space Tech Expo 2016 at the Pasadena Convention Center in Pasadena, CA - May 24-26.

Q-PLUS Labs' Case Study: California State University, Fullerton Baja SAE Team's Cutting Brake 3D Scanning

April 2016: California State University, Fullerton’s Titan Baja SAE (Society of Automotive Engineers) team is preparing for their 2016 competition season and sought Q-PLUS Labs' measurement expertise to 3D scan a crucial component of their new vehicle. 

Join Q-PLUS Labs at the 2016 Measurement Science Conference

March 2016: Q-PLUS Labs is exhibiting in Booth #312 at the 2016 Measurement Science Conference at the Disneyland Hotel in Anaheim, CA - March 23-25. Come see our selection of metrology equipment.

MD&M West 2016

February 2016: Join Q-PLUS Labs at the 2016 MD&M West show at the Anaheim Convention Center in Anaheim, CA - February 9-11.

Q-PLUS Labs Introduces ANSYS SpaceClaim to Software Arsenal

January 2016: Q-PLUS Labs now offers ANSYS SpaceClaim, one of the fastest platforms for working with geometry, whether to design a part, prepare a model for downstream jobs, or reverse engineer an STL file. View ANSYS SpaceClaim Software.

Happy Holidays from Everyone at Q-PLUS Labs!

December 2015: Wishing you health and happiness this Holiday Season and prosperity in the New Year. See how we 3D rendered Santa. Click here to view!

 

Q-PLUS Labs Case Study CSUF Baja SAE

November 2015: Q-PLUS Labs helps California State University, Fullerton's Baja SAE team jump start their racing season with 3D Scanning. Read More

Join Q-PLUS Labs at the 2015 Design 2 Part Show!

October 2015: You're invited to Design 2 Part, the largest Design & Contract Manufacturing show in Southern California! Visit Q-PLUS Labs in the Pasadena Convention Center at Booth #410 - Oct.

Join Q-PLUS Labs at WESTEC 2015

September 2015: Join Q-PLUS Labs' booth #2640  at WESTEC 2015 at the Los Angeles Convention Center in Los Angeles, CA - September 15th-17th for a chance to win $500 in Q-PLUS Bucks!  Click here for FREE admission.

Q-PLUS Labs offering PolyWorks to maximize the benefits for 3D measurement technologies for industrial manufacturing organizations

August 2015: Defining the cutting edge of 3D metrology, the PolyWorks software suite maximizes productivity, quality, and profitability when integrating 3D measurement technologies into an industrial manufacturing process. 

Q-PLUS Labs Case Study

July 2015: Q-PLUS Labs boards the USS Freedom, a first-in-class littoral ship, for a unique 3D Scanning project. Read More!

Q-PLUS Labs' introduces newest FARO Scanner Freestyle 3D efficient handheld 3D scanning

June 2015: The brand new FARO Scanner Freestyle3D quickly and reliably documents rooms, structures and objects in 3D and creates high-definition point clouds. View F

Q-PLUS Labs releases eBook on Nano Measurement Technology

May 2015: Gain a comprehensive understanding of various technologies that are currently used for nano measurement in our new Ebook: Selecting the Right Nano Measurement Technology for Dimensional Inspection and Reverse Engineering

Join Q-PLUS Labs at RAPID 2015

April 2015: Join Q-PLUS Labs at RAPID 2015 at the Long Beach Convention Center in Long Beach, CA - May 19-21. RAPID is celebrating its 25th anniversary with the most comprehensive display of 3D technology, expertise, and innovation ever showcased in one place!  Click here to Register.

A2LA RENEWS Q-PLUS Labs' ISO 17025 Accreditation

March 2015: A2LA renews Q-PLUS Labs' ISO 17025 accreditation continuing our long time dedication to quality dimensional measurement and inspection services.View our certification

Join Q-PLUS Labs at the 2015 Measurement Science Conference

February 2015: Join Q-PLUS Labs at the 2015 Measurement Science Conference at the Disneyland Hotel in Anaheim, CA - March 18-20. Discover measurement best practices, innovations and ideas from some of the nation's best technical minds, in addition to hands-on training. Click here to Register.

MD&M West 2015

January 2015: Join Q-PLUS Labs at the 2015 MD&M West show at the Anaheim Convention Center in Anaheim, CA - February 10-12. Enhance your knowledge of the latest industry innovations and emerging technologies. Click here for Free Admission (Source Code: invite)

Happy Holidays from everyone at Q-PLUS Labs!

December 2014: Wishing you health and happiness this Holiday Season and prosperity in the New Year. See a 3D view of our hard-working staff who meet your needs year round. Click here to view!

 

Q-PLUS Labs' newest FARO Edge ScanArm HD to take 3D Scanning to the Next Level

November 2014: The brand new FARO Edge ScanArm HD offers rapid point cloud collection with extreme resolution and high accuracy – all with a greatly enhanced ability to scan shiny surfaces. View Edge ScanArm HD<

Design 2 Part Show 2014

October 2014: You're invited to Design 2 Part, the largest Design & Contract Manufacturing show in Southern California! Visit Q-PLUS Labs in the Long Beach Convention Center at Booth #425 - Oct.

Q-PLUS Labs' Case Study

September 2014: Q-PLUS Lab's shows 3D Scanning in action with this unique project for Harvard University's Graduate School. Read More!

Q-PLUS Labs adds Multi-Sensor CMMs

August 2014: Q-PLUS Labs teams up with Zeiss to offer enhanced precision solutions with Multi-Sensor CMMs. View Product Features & Specifications

A Multi-Dimensional Look at 3D Scanning

July 2014: In A Multi-Dimensional Look at 3D Scanning, you'll gain a comprehensive understanding of 3D scanning from an information-gathering perspective.
Download Now!

3D Systems Geomagic Capture Webinar

June 2014: Q-PLUS Labs team up with 3D Systems for a webinar presenting Geomagic Capture for Design X: The First Affordable, Complete Scan-Based Design System to Speed Up Product Development.

View Here

Q-PLUS Labs expands with addition of Zeiss

May 2014: Q-PLUS Labs expands its cutting-edge metrology product line with the addition of Surface, Contour and Form measurement systems by Zeiss. View Product Features & Specifications

 

Q-PLUS Labs EXPANDS WITH CT 300

April 2014: Q-PLUS Labs' nano measurement capabilities expand with the introduction of the cyberSCAN CT 300 from cyberTECHNOLOGIES 

Read More!

Q-PLUS Labs’ Geomagic Capture Offer

March 2014: The ultra compact Geomagic Capture brings professional-grade, accurate 3D scanning wherever you need it. Geomagic Capture is the first complete system that combines advanced blue LED scanner technology with easy to use software to provide high-fidelity data that goes directly to CAD.

Aerodef 2014

February 2014: Come see Q-PLUS Labs' newest products and specials at the 2014 AERODEF Summit & Exhibition at the Long Beach Convention Center - February 25-27th!

 

MD&M 2014

January 2014: Q-PLUS Labs will be exhibiting its latest metrology services and products at the 2014 MD&M West show at the Anaheim Convention Center in Anaheim, CA - February 11-13. Register Now! (Booth 966)

HAPPY HOLIDAYS FROM Q-PLUS LABS!

December 2013: In the spirit of the season, we thought we'd spread a little holiday cheer. Below are some of our "superhero" staff that work hard all year long to serve your needs. Click to view! Enjoy!

First Article Inspection Best Practices

October 2013: If you have determined that 3D scanning is the right method for your application, following a set of key best practices will help ensure that you achieve the highest quality results. Read More!

WESTEC 2013

September 2013: Q-PLUS Labs will be exhibiting its latest services and products at the 2013 WESTEC show at the LA Convention Center in Los Angeles, CA - October 15-17. Register Now! (Booth 3306)

CONSIDERATIONS FOR SELECTING 3D SCANNING EQUIPMENT

August 2013: Understand these four important factors when selecting 3D Scanning Equipment. Read our recent blog!

ISO 17025 ACCREDITATION RENEWED

July 2013: A2LA renews Q-PLUS Labs’ ISO 17025 accreditation continuing our long time dedication to quality dimensional measurement and inspection services. Click to view certification!

FREE GUIDE: THE REVERSE ENGINEERING CHECKLIST

June 2013: Whether you insource or outsource, make sure your next reverse engineering project is a success. Download our free guide now!

FOUR POWERFUL WAYS TO USE DIMENSIONAL INSPECTION

May 2013: Read our latest blog about the four most common Dimensional Inspection applications. Read now!

FREE GUIDE: UNDERSTANDING DIMENSIONAL INSPECTION

April 2013: Download our latest free guide to understanding Dimensional Inspection! Selecting the Right Dimensional Inspection Equipment.

DEL MAR ELECTRONICS 2013

March 2013: Q-PLUS Labs will be exhibiting its latest services and products at the 2013 Del Mar Electronics & Design show at the Del Mar Fairgrounds in San Diego, CA - May 1-2. Register Now! (Booth 508)

AERODEF 2013

February 2013: Q-PLUS Labs to exhibit latest services and products at the 2013 AeroDef Manufacturing Exhibit in Long Beach, CA - March 19-21. Register Now! (Booth 638)

MD&M WEST 2013

January 2013: Q-PLUS Labs to exhibit Services and Products at the 2013 MD&M West trade show on February 11-14 (Booth 964). Register Now!

HAPPY HOLIDAYS!

December 2012: Wishing you health and happiness this Holiday Season and prosperity in the New Year. Watch our Happy Holidays video to see what a CMM and little camera magic can do.

INTRODUCING THE Q-PLUS BLOG!

November 2012: We're pleased to announce the Q-PLUS Blog, an informative source for dimensional measurement matters and issues. Take a read and let us know what you think.

NEW STARRETT DIGITAL OPTICAL COMPARATOR

October 2012: Q-PLUS Labs continues to add to its cutting-edge metrology product line with the addition of the revolutionary HDV300 video based measurement system by Starrett. View product features & specifications.

Design-2-Part 2012

September 2012: Join Q-PLUS Labs at the 2012 Design-2-Part show on October 2nd and 3rd at the Long Beach Convention Center! (Booth #417) Register now for free admission!

ZEISS ACCURA RAMPS UP TO FULL SERVICE

August 2012: Q-PLUS Labs formally brings online the latest Zeiss DCC-CMM MASS technology. With a very large Zeiss Accura CMM, Q-PLUS Labs has taken precision to a new level and size.

NEW STEINBICHLER COMET LƎD 1M

July 2012: The new 3D-sensor model STEINBICHLER COMET LƎD 1M is the perfect cost-effective entry level solution and offers efficient 3D data acquisition at a fantastic price-performance ratio. View our available Steinbichler products, or Contact Us!

FORCE TESTING CAPABILITIES EXPANDED

June 2012: Q-PLUS Labs improves on its expansive measurement services and diverse product line with the addition of new Force Testing capabilities and the latest Starrett Force Testing technology.

ASQ WORLD CONFERENCE

May 2012: Q-PLUS Labs to exhibit Services and Products during the 2012 ASQ World Conference at the Anaheim Convention Center on May 21nd-23rd (Booth 718). Register Now!

Del Mar Electronics 2012

April 2012: Q-PLUS Labs to exhibit Services and Products during the 2012 Del Mar Electronics show located at the Del Mar Fairgrounds in San Diego on May 2nd-3rd (Booth 745). Register Now!

WESTEC 2012

March 2012: Q-PLUS Labs to exhibit Services and Products at the 2012 Westec trade show at the Los Angeles Convention Center on March 27-29 (Booth 1855). Register Now!

ON-SITE MEASUREMENT UPDATE

February 2012: Q-PLUS Labs further improves on its expansive measurement services with the addition of new precision laser tracker technology. In-lab or on-site our new "world's most accurate large volume laser tracker" FARO Laser Tracker ION enables large scale projects to be easily tackled with the utmost precision and quality.

MD&M WEST 2012

January 2012: Q-PLUS Labs to exhibit Services and Products at the 2012 MD&M West trade show on February 14-16 (Booth 964). Register Now!

END-OF-THE-YEAR SPECIALS

December 2011: Take advantage of our annual End-Of-The-Year Demo Specials! Don't miss out on these limited time offers. Offers end December 21st, 2011. Click to view Equipment

SEMA SHOW 2011

November 2011: Q-PLUS Labs joins Steinbichler to present the new L3D, a cutting edge yet economical blue light 3D scanner at the 2011 SEMA Show in the Las Vegas Convention Center from November 1st to the 4th (Booth #10571).

ASQ QUALITY DAY

October 2011: Q-PLUS Labs exhibits its extensive line of metrology services at the 2011 ASQ Quality Day event in Santa Ana on October 28th.

DESIGN-2-PART 2011

September 2011: Q-PLUS Labs exhibits Services and Products at the 2011 Design-2-Part show October 12-13 (Booth 303) Register Now!

 

Nano Measurement Capabilities Expanded

August 2011: Q-PLUS Labs continues to broaden its Nano Measurement services. Using advanced 3D surface profilometry technology and cutting edge analysis techniques we are able to dimensionally characterize and analyze microscopic geometry and provide precise surface finish and wear measurements.

MORE CALIBRATION SERVICES ADDED

July 2011: Q-PLUS Labs continues to add to its array of calibration services. Find updated information on CMM Calibrations, Vision System Calibrations, and more here! Contact Us for more information.

ISO 17025 ACCREDITATION RENEWED

June 2011: A2LA renews Q-PLUS Labs’ ISO 17025 accreditation continuing our long time dedication to quality dimensional measurement and inspection services.
ISO 17025 Accreditation

EMERGENCY ROOM FOR PARTS

May 2011: Q-PLUS Labs’ accredited laboratories are fully equipped to handle any and all dimensional inspection needs accurately and quickly.

LA JOLLA MOTOR CAR CLASSIC

April 2011: Q-PLUS Labs exhibits large scale 3D Scanning and Reverse Engineering capabilities at the 7th Annual Motor Car Classic show Sunday, April 3rd.

AERODEF SHOW 2011

March 2011: Q-PLUS Labs exhibits Services and Products at the AeroDef Show April 5-7 (Booth 1818)

ON-SITE SERVICES EXPANDING

February 2011: Q-PLUS Labs continues to expand its array of on-site measurement services. Dimensional Inspection, Reverse Engineering, and 3D Scanning at your location for your specific needs.

MD&M Trade Show 2011

January 2011: Q-PLUS Labs exhibits Services and Products at the MD&M Show February 8-10 (Booth 966)

CREAFORM HANDYPROBE

December 2010: Q-PLUS Labs introduces the new Creaform HandyPROBE portable coordinate measurement system! Adding to our expanding product offerings and service capabilities, this portable CMM arm-free probing system with C-Track dual-camera sensor generates high accuracy measurements reliably and quickly. Click here for more information: Creaform HandyPROBE.

STEINBICHLER COMET 5

November 2010: Q-PLUS Labs deploys a state of the art Steinbichler COMET 5 white light system reaching new heights in 3D scanning capabilities and metrology product offerings. Complimenting an existing Steinbichler system, this top of the line 3D scanner provides high-speed measurements and professional data quality. Click here for more information: Steinbichler Comet 5.

AERO ENGINEERING SHOW 2010

October 2010: Q-PLUS Labs exhibits Services and Products at the 2010 Aero Engineering Show in Pasadena on November 2-3 (Booth 115)

NEW GALLERY SECTION ON WEBSITE

September 2010: Q-PLUS Labs recently unveils a new Gallery section to the website. This new addition gives users the ability to dynamically view examples of 3D Scans, 3D Analyses, Solid Models, and more right in your web browser! This work-in-progress is a precursor of the gallery’s expanding library of interesting and relevant images and examples.

BROCHURE DOWNLOADS NOW AVAILABLE

June 2010: Brochures for various Services and Products are now available throughout the website. These can be accessed in a number of ways on this site including the Brochures link under the Company heading in the navigation column on the left side of each webpage. View Brochures

Q-PLUS LABS NEW WEBSITE – BETA VERSION

April 2010: Q-PLUS Labs goes live with a beta version of the company’s new website. Many improvements are still being made and an official launch with much more to come is planned in the coming weeks. Please send your feedback to webmaster@qpluslabs.com.

Westec Trade Show 2010

March 2010: Q-PLUS Labs exhibits Services and Products at the Westec Show March 23-25 (Booth 2436)

MD&M Trade Show 2010

January 2010: Q-PLUS Labs exhibits Services and Products at the MD&M Show February 9-11 (Booth 966)

A2LA Accreditation Expansion

September 2009: Q-PLUS Labs expands scope of accreditation under A2LA for Dimensional Measurement and Calibration services.

Rapidform XOV2

May 2009: After completing rigorous training, Q-PLUS Labs staff begins implementation of the Rapidform XOV2, enabling our lab to provide better results through parametric programming, and in less time.

2D Profile Pro

April 2009: Q-PLUS Labs launches 2D Profile Pro, a simple yet powerful 2D profile analysis program designed by inspectors for inspectors.

Westec Trade Show 2009

March 2009: Q-PLUS Labs exhibits Services and Products at the Westec Show March 30-April 2 (Booth 2972)

MD&M Trade Show

January 2009: Q-PLUS Labs exhibits Services and Products at the MD&M Show February 10-12 (Booth 848)

Holiday Closure

December 2008: Happy Holidays! Q-PLUS will be closed for the Holidays starting Dec 23rd 2008 and returning January 5th 2009

Go Green Campaign

October 2008: Q-PLUS Labs revs up its “Go Green Campaign” by ordering advanced lighting technology for its Irvine facility.

Nike Recognizes QPLUS

August 2008: Nike recognizes Q-PLUS Labs as an approved supplier.

Bell Helicopter Supplier

June 2008: Bell Helicopter reaffirms Q-PLUS Labs as approved supplier.

Westec Trade Show 2008

March 2008: Q-PLUS Labs exhibits Services and Products at Westec trade show March 31 to April 3, 2008 (Booth #2972).

MD&M Trade Show 2008

January 2008: Q-PLUS Labs exhibits Services and Products at the MD&M show January 29 - 31, 2008.

A2LA Scope of Accreditation

December 2007: Q-PLUS Labs further expands A2LA scope of accreditation.

Automated 3D Scanning

November 2007: Q-PLUS Labs introduces new automated 3D scanning capability offering economical alternative to our high-end scanning solutions.

3D CAD File Translation

July 2007: Q-PLUS Labs announces 3D CAD file translation services using CATIA software.

Air Force Recognizes QPLUS

June 2007: Q-PLUS Labs recognized by the Air Force as an elite supplier, paving the way for continued growth within the military community of manufacturing and supply chain associates.

Westec Show 2007

January 2007: Q-PLUS Labs exhibits Services and Products at WESTEC trade show March 26 - 29, 2007 (Booth# 2978).

Kinemetric Products Added

May 2006: Q-PLUS Labs Product Sales Division adds Kinemetric Engineering metrology product line.

Measurement Center Corporation

April 2006: Measurement Center Corporation becomes an integral part of Q-PLUS Labs greatly reinforcing the Product Sales Division.

A2LA Accreditation

March 28, 2005: Q-PLUS receives formal A2LA accreditation to IS0 17025.

Website Enhanced

Q-PLUS Launches Enhanced Website with much needed improvements and expanded information on our services and products.

Company Changes Location

Q-PLUS Moves to Larger Facilities. Long planned transition finally comes to fruition.

3D Scanning & Analysis

Q-PLUS Boosts Advanced 3D Scanning & Analysis Capabilities. State-of-the-art hardware integrated with specialized software allows faster and more economical reverse engineering and 3D inspection/analysis.