Blog2018-12-21T06:10:52+00:00

Home > Dimensional Measurement Blog

Dimensional Measurement Blog

CT Scanning: Harnessing the Power of X-Ray for Part Inspection

Getting to the heart of intricate, small parts using testing methods that require that the part remain unaltered can be a behemoth of a task. In the case of these small parts, the features within can be extremely complex and layered, making it difficult to accurately obtain dimensional measurements without cutting into the part. This is where CT scanning, also known as Computed Tomography scanning, provides a solution for situations requiring a dimensional testing technique that does not cause damage to the part. […]

July 2017|

8 Dimensional Inspection Applications for Nano Measurement

The development of new ways to measure objects and surfaces at the nano scale has allowed dimensional inspection providers to improve both accuracy and speed. It has also enabled the measurement of larger samples and objects with different surface types, as well as provide better 3D imaging capability. […]

July 2017|

The Importance of Part Sorting & Inspection Services

We all know the old adage, “time is money.” For OEMs especially, both time and money are essential factors when it comes to the entire production process, from design down to inspection. With the exponential improvements to the technology involved in the production process, the amount of time it usually takes to mass produce parts has been considerably curtailed, saving companies also on the cost it usually takes to previously produce those parts. But what happens when something goes wrong […]

June 2017|

How Does It Measure Up: CMMs vs. Articulating Arms

How are your measurements adding up? Do you need automation combined with a high level of accuracy? Or perhaps, your application demands a portable measurement device for its ability to reach difficult to measure features? With the ever growing need for accurate measurements in a rapid paced manufacturing industry, knowing the best type of universal 3D dimensional measurement device available for your application will help streamline both your manufacturing and quality inspection processes. […]

May 2017|

3 Nano Measurement Factors to Consider for Dimensional Inspection

As technology in our world progresses exponentially, the demand for more precise measurement requirements grows as the components manufactured within these products become smaller and smaller. If you are manufacturing products with extremely small dimensional measurements, you may need to consider nano-measurement technology in order to ensure that your products are meeting the tight tolerances required in today’s precision […]

April 2017|

3 Surprising Facts about Dimensional Inspection

When you think about your daily life the topic of dimensional inspection will likely never come up. In fact, many people could go through their lives not understanding how dimensional inspection works, let alone how it fits into almost every aspect of their daily lives through the products they use. From the coffee cup that you may be holding right now as you read this article to the car you drive (hopefully not while you are reading this article), dimensional inspection was an integral part of the manufacturing […]

November 2016|
Load More Posts
Thanks!

REQUEST A QUOTE












NoneDimensional InspectionReverse Engineering3D ScanningCalibrationOn-Site MeasurementConsultingTrainingCT ScanningPart Sorting & InspectionUnsure/Other

NoneVision SystemsCMMS3D ScannersSoftwareOptical ProbesOptical ComparatorsPortable CMMSPhotogrammetryForm & Roundness TestingForce GagesSPCCustom Gages & FixturesRetrofitsSurface Finish AnalyzersAccessoriesUnsure/Other